remote servicing code for SAMSUNG CTV model n.

All Latest Models

For entering into service Mode:

· Press the remote control keys in the following sequence

            POWER_DISPLAY_MENU_MUTE_POWER

· Controls : CH/P Up/Dn keys

· Changing data value: Volume +/- keys

· To exit Switch off the set
किसी किसी रिमोट में display का स्विच न होकर INFO का होता है
POWER मतलब stanby
टीवी को चालू करके रिमोट से
power -info-menu-mute-power

ऐसा करने से ओंन टीवी आफ होकर ओन होगा तो सर्विस मोड खुल चूका होगा

LG remote servicing code for model n. ALL RF-14A80K ,RF-14/20/21CA30K,RF-14/20/21CA30KE, RF-20/21CB30F,RF-20/21CB30VE,RF-21FA20KE,CF-14D79K,CF14D79KE,CF20/21D79K,CF20/21F69K,CF-20/21S12KE,CF-20/21D331KE,CF-20/21S42KS

All    LATEST MODEL

For entering service mode:

· Simultaneously press “OK” button on remote handset and on the front panel of television receiver for 6 to 8 seconds.

· Controls: YELLOW button (Q-VIEW button)

· Accessing parameters: Program Up/Dn buttons

· Changing data value: Volume Up/Dn buttons
To save ''OK''
· To exit: Switch of the set

SONY TV remote servicing code for model n. KV-s2941 a/b/d/k, kv-2943 e

remote commander   RM-831

to enter service mode    by remote press key  'VKL' two time.


(2) will display  " T T "  right side of screen.
(3) by remote      menu

select your divice


for store  ...OK.....
for exit....switch off for few second.

SONY TV remote servicing code for model n. kv-b 2911 a/b/d/k , kv-b 2912v, kv- b2913 e

remote commander  RM-830


(1) ' on ' tv set from main power swich with pressing any two switches of front pannel.
(2) will display  " VOL "  right side of screen.
(3) by remote      menu

select your divice

for store  ...OK.....
for exit....switch off for few second.

SONY TV remote servicing code for model n. kv-e 2551 a/b/k/e, kv -s 29 jn1 / mn1/ sn1 kv- s34, kv-e 2531, kv-e 2931, kv-e 3431, kr- s4613

(1) ' on ' tv set from main power swich with pressing any two switches of front pannel.

(2) will display  " T T "  right side of screen.

(3) by remote      menu


select your divice

for store  ...OK.....
for exit....switch off for few second.

SONY TV remote servicing code for model n. kv 2170, kv 2180, kv2540, kv 2181 kr

(1) on the tv set  any channel

(2)  by remote 

? _5 _vol + _menu

to exit service mode 

    00

Remot service code for SONY TV model n.KV-2197M3, KV-G14M1, KV-G14MD1, KV-G14P1, KV-G14P11, KV-G14PQ1 KV-G14S1

Remot commander   RM-870


(1) by remote go to standby mode.
(2)display_5 _vol+ _power

PUT THE TV SET IN THE SERVICE MODE

1,  4,  select adjustment mode.
3,  6,  rise / lower data value.
muting _write/lock
0,  execute the writing
7,  0,   all the data becomes the value in memory.
8,  0,  all user control goes to the standard state.
5,  0,  service data initialization.
2,  0,  write 50 Hz adjustment data to 60 Hz 

Toshiba 8893 remote servicing code

TOSHIBASERVICE MENU

TOSHIBA - 8893 (MONO-STR-250CH)
STEP NO :-1         PRESS MENU
STEP NO :-2         ENTER CODE:- 6483
STEP NO :-3         ENTER DISPLAY
STEP NO :-4         ENTER DISPLAY=AGAIN CHART PRESS MUTE BUTTON
---------------------------------------------------------------------------------------
                                                         CHART NO
                                                                                                                           
        F0                           F-1                                                           F-2
                   
                                             
       RC= 80               H. PHASE= 11                              SUB. CONTRUST= 15
       GC=80                V.SIZE= 40                                   SUB.COLOUR= 0
       BC=80                V.POS= 0                                     SEC.COLOUR= 0
       GD=64               V.LIN= 20                                     ST3= 32
       BD=64               V.SC.= 10                                      ST4= 32
       SB=0                  H.BOW= 4                                    OSD.CONT= 3
       U.BLK=8           H.PARA= 4                                   OSD.H.POSI=33
       V.BLK=8           H.BLK-LEFT= 0                           OSD.V.POSI= 1
                                  H.BLK-RIGHT= 0